While a valve's intended application often determines its composition, as one media or another may be more compatible, it's not always clear as to why this is true. Choices of materials, however, are limited to man's metallurgical prowess. Two of the most common materials used to produce valves are bronze and brass. This preference came about because both metals are extremely malleable. Both are man-made combinations of natural metallurgical elements: brass is an alloy made from copper and zinc, while bronze--one of the oldest alloys--is made primarily from copper and tin. Valves produced from either metal provide numerous and various advantages, though which one is correct for your application--and which one is better--may be debatable.
The Romans were probably the first to fashion flow control valves--very similar to those of today--out of bronze as early as the 1st Century B.C. Piping was manufactured out of the lead, as were the welds connecting systems together. Much like modern bronze valves of today, the Romans used copper, tin, and lead to make the metal malleable, though today's bronze sometimes includes manganese or aluminum as additives, as well as nickel. One drawback of bronze is that valves can only be produced by casting, or by machining cast ingots. The rough exterior of bronze--which is known for porosity and shrinkage cavities--is a direct result of casting (though bronze alloys containing nickel, lead, and bismuth will hold a polish). On the upside, bronze is fairly inexpensive, extremely ductile, and is great for resisting corrosion, particularly from any corrosives similar to seawater.
Even more malleable than bronze, brass is also more versatile, as different combinations of copper and zinc create a wide range of brasses with varying properties. Brass also lends itself well to manufacturing, as it can be cast, forged, heat extruded, or cold drawn in its creation. It is very machinable, and its smooth surface helps keep finishing costs down. Brass is highly corrosion-resistant, though high levels of chlorine can break down zinc content. Otherwise, brass is perfect for a variety of media, including natural gas. And, for potable water, brass is a natural choice over bronze, as it typically contains much lower levels of lead than bronze.
Of course, by today's standards, these contrasts and comparisons are rudimentary. Modern metallurgy is far more advanced than what even the Romans may have dreamed of. Today's foundries cast superior bronze alloys which are utilized for countless applications, though use for potable water is slowly being phased out. Likewise, modern brass alloys that resist dezincification--a problem associated with standard extruded brass (because of the zinc content)--are being produced via hi-tech fabricating techniques using chemicals and heat. These breakthroughs in metallurgy help to negate a need for lead in the mix, and increase the longevity of piping and valves, ensuring the continued use of brass for years to come. But, while brass enjoys several advantages over bronze, don't count it out just yet. Lead Free Bronze valves (bronze valves meeting or exceeding Clean Water Act lead restrictions) are readily available, and are generally the first choice for water pipes with diameters under 3" when keeping costs down is a must. Coincidentally, it's no mystery that both bronze and brass are favored as valve material by numerous industries utilizing piping systems, as both alloys have excellent solderability characteristics.
Because of their specific properties, bronze valves are best suited for the following applications and industries:
Petrochemical
Marine
Safety relief
Flow direction control
Flow shut-off
Flow Control
Brass valves are uniquely suited to these applications:
Air and liquid shut-off
Natural gas shut-off
Flow direction control
Potable water
Flow Control
Yuanda valve provides you with high-quality brass valves. If you need them, please contact us now!